Siemens 6ES7516-2GP03-0AB0 CPU 1516pro F-2 PN

This model is intended for a field-mounted ET 200pro safety controller with IP65/67 protection, a 3-port IRT network and a separate PROFINET RT interface. Its integrated network arrangement is First PROFINET IRT interface with a 3-port switch plus a second PROFINET RT interface. No integrated PROFIBUS interface is specified; use an approved communication component if the project requires PROFIBUS. Similar memory capacity, an F designation or a similar interface count does not establish a direct replacement relationship.

Motion Control status: Not designated as a Technology CPU. Confirm the required Motion Control functions and engineering scope from the installed project; do not infer them from the G suffix. Runtime and licensing status: No C/C++ Runtime, OPC UA Runtime or multifunction-platform runtime license is identified as included with this standalone CPU Siemens specifies HW functional status FS01; firmware V4.0; firmware update possible. Engineering requirement: TIA Portal V20 for firmware V4.0 or V19 for firmware V3.1, or later; older projects can be configured as 6ES7516-2GN00-0AB0.

Use Siemens 6ES7516-2GP03-0AB0 only in the documented controller architecture. Required host and accessory condition: ET 200pro station with IP65/67 installation; a SIMATIC Memory Card and connection module are required. Fail-safe CPU: preserve the validated F-program, safety signatures, PROFIsafe settings, network configuration and security settings before replacement Validate the complete hardware configuration, firmware, network interfaces, fieldbus setup, application backup and restart procedure after replacement.

• Complete Siemens Order Number
• CPU Variant and Product Type
• Fail-Safe or Technology Requirement
• Included Runtime Licenses
• Firmware Version
• TIA Portal Version
• SIMATIC Memory Card
• Network and PROFIBUS Interfaces
• Program and Safety Project Backup
• Required Quantity

This page is specific to Siemens 6ES7516-2GP03-0AB0 as a CPU 1516pro F-2 PN. A similar Siemens component should not be treated as a direct replacement until the complete order number, hardware revision, terminal block or BaseUnit, signal configuration and system application have been confirmed. Compare the order code character by character with the installed item, then check the ET 200SP HA station records, module position, field wiring and applicable engineering documentation. For Ex components, hazardous-area certification, the Ex module-group arrangement and the permitted field-device connection must also be confirmed. The original label and project records remain the basis for technical comparison.

Please confirm Siemens 6ES7516-2GP03-0AB0, CPU variant CPU 1516pro F-2 PN, fail-safe or technology requirement, included runtime licenses, firmware, TIA Portal version, Memory Card, network interfaces, program backup and required quantity before ordering.

You will receive an email confirming we have received your enquiry.

A dedicated account manager will review your model number, photos and application details before quotation.

You will receive a comprehensive quote tailored to your specific needs.