Siemens 6ES7517-3FQ10-0AB0 CPU 1517F-3 PN

This model is intended for a high-performance central safety controller with two switched PROFINET IRT networks and a separate Ethernet interface. Its integrated network arrangement is First PROFINET IRT interface with a 2-port switch, second PROFINET IRT interface with a 2-port switch and a third Ethernet interface. No integrated PROFIBUS interface is specified; use an approved communication module or processor if the project requires PROFIBUS. Similar memory capacity, an F designation or a similar interface count does not establish a direct replacement relationship.

Motion Control status: Not designated as a Technology CPU. Confirm configured Motion Control functions, technology objects and the project engineering before replacement. Runtime and licensing status: No C/C++ Runtime, OPC UA Runtime or multifunction-platform runtime license is identified as included with this standalone CPU Siemens specifies Hardware and firmware release must match the installed project; Siemens safety documentation lists this CPU from release 01 and firmware V4.0. Engineering requirement: Use a TIA Portal hardware catalog supporting the installed firmware. Confirm the exact installed firmware and project version before download or replacement..

Use Siemens 6ES7517-3FQ10-0AB0 only in the documented controller architecture. Required host and accessory condition: S7-1500 central rack; SIMATIC Memory Card required. Fail-safe CPU: keep the approved F-program, safety signatures, network configuration and access controls with the replacement project Validate the complete hardware configuration, firmware, network interfaces, fieldbus setup, application backup and restart procedure after replacement.

• Complete Siemens Order Number
• CPU Variant and Product Type
• Fail-Safe or Technology Requirement
• Included Runtime Licenses
• Firmware Version
• TIA Portal Version
• SIMATIC Memory Card
• Network and PROFIBUS Interfaces
• Program and Safety Project Backup
• Required Quantity

This page is specific to Siemens 6ES7517-3FQ10-0AB0 as a CPU 1517F-3 PN. A similar Siemens component should not be treated as a direct replacement until the complete order number, hardware revision, terminal block or BaseUnit, signal configuration and system application have been confirmed. Compare the order code character by character with the installed item, then check the ET 200SP HA station records, module position, field wiring and applicable engineering documentation. For Ex components, hazardous-area certification, the Ex module-group arrangement and the permitted field-device connection must also be confirmed. The original label and project records remain the basis for technical comparison.

Please confirm Siemens 6ES7517-3FQ10-0AB0, CPU variant CPU 1517F-3 PN, fail-safe or technology requirement, included runtime licenses, firmware, TIA Portal version, Memory Card, network interfaces, program backup and required quantity before ordering.

You will receive an email confirming we have received your enquiry.

A dedicated account manager will review your model number, photos and application details before quotation.

You will receive a comprehensive quote tailored to your specific needs.