Siemens 6ES7518-4FX00-1AC0 CPU 1518F-4 PN/DP MFP CPU Bundle

This model is intended for a licensed S7-1500F multifunction-platform bundle combining an MFP CPU with explicitly included C/C++ Runtime and OPC UA Runtime licensing. Its integrated network arrangement is First PROFINET IRT interface with a 2-port switch, second PROFINET RT interface, third PROFINET basic-services interface and fourth integrated PROFIBUS interface. Integrated PROFIBUS interface on the fourth interface. Similar memory capacity, an F designation or a similar interface count does not establish a direct replacement relationship.

Motion Control status: MFP CPU bundle, not a T or TF CPU designation. Confirm the actual Motion Control and technology-object scope from the project and license documentation. Runtime and licensing status: Bundle includes CPU 1518F-4 PN/DP MFP 6ES7518-4FX00-1AB0, C/C++ Runtime and an OPC UA Runtime license. Do not present these runtime licenses as included with standalone CPU order numbers. Siemens specifies HW functional status FS04; firmware V3.0; firmware update possible. Engineering requirement: TIA Portal V18 for firmware V3.0 or V15 for firmware V2.5, or later.

Use Siemens 6ES7518-4FX00-1AC0 only in the documented controller architecture. Required host and accessory condition: S7-1500 central rack; SIMATIC Memory Card of at least 2 GB required. Fail-safe MFP CPU: preserve the validated F-program, C/C++ and OPC UA runtime license records, safety signatures, certificates, users and network configuration Validate the complete hardware configuration, firmware, network interfaces, fieldbus setup, application backup and restart procedure after replacement.

• Complete Siemens Order Number
• CPU Variant and Product Type
• Fail-Safe or Technology Requirement
• Included Runtime Licenses
• Firmware Version
• TIA Portal Version
• SIMATIC Memory Card
• Network and PROFIBUS Interfaces
• Program and Safety Project Backup
• Required Quantity

This page is specific to Siemens 6ES7518-4FX00-1AC0 as a CPU 1518F-4 PN/DP MFP CPU Bundle. A similar Siemens component should not be treated as a direct replacement until the complete order number, hardware revision, terminal block or BaseUnit, signal configuration and system application have been confirmed. Compare the order code character by character with the installed item, then check the ET 200SP HA station records, module position, field wiring and applicable engineering documentation. For Ex components, hazardous-area certification, the Ex module-group arrangement and the permitted field-device connection must also be confirmed. The original label and project records remain the basis for technical comparison.

Please confirm Siemens 6ES7518-4FX00-1AC0, CPU variant CPU 1518F-4 PN/DP MFP CPU Bundle, fail-safe or technology requirement, included runtime licenses, firmware, TIA Portal version, Memory Card, network interfaces, program backup and required quantity before ordering.

You will receive an email confirming we have received your enquiry.

A dedicated account manager will review your model number, photos and application details before quotation.

You will receive a comprehensive quote tailored to your specific needs.