Siemens 6ES7516-3FP03-0AB0 CPU 1516F-3 PN/DP

This model is intended for a high-capacity central S7-1500 safety controller where simultaneous PROFINET IRT, PROFINET RT and PROFIBUS engineering must remain aligned. Its integrated network arrangement is First PROFINET IRT interface with a 2-port switch, second PROFINET RT interface and third integrated PROFIBUS interface. Integrated PROFIBUS interface on the third interface. Similar memory capacity, an F designation or a similar interface count does not establish a direct replacement relationship.

Motion Control status: Not designated as a Technology CPU. Confirm the Motion Control requirement and configured technology objects from the project before replacement. Runtime and licensing status: No C/C++ Runtime, OPC UA Runtime or multifunction-platform runtime license is identified as included with this standalone CPU Siemens specifies HW functional status FS04; firmware V4.1; firmware update possible. Engineering requirement: TIA Portal V21 for firmware V4.1 or V18 for firmware V3.0, or later; older projects can be configured as 6ES7516-3FN02-0AB0.

Use Siemens 6ES7516-3FP03-0AB0 only in the documented controller architecture. Required host and accessory condition: S7-1500 central rack with project-specific I/O, PROFINET and PROFIBUS configuration; SIMATIC Memory Card required. Fail-safe CPU: retain the validated F-program, safety signatures, PROFIsafe parameters, certificates and security configuration Validate the complete hardware configuration, firmware, network interfaces, fieldbus setup, application backup and restart procedure after replacement.

• Complete Siemens Order Number
• CPU Variant and Product Type
• Fail-Safe or Technology Requirement
• Included Runtime Licenses
• Firmware Version
• TIA Portal Version
• SIMATIC Memory Card
• Network and PROFIBUS Interfaces
• Program and Safety Project Backup
• Required Quantity

This page is specific to Siemens 6ES7516-3FP03-0AB0 as a CPU 1516F-3 PN/DP. A similar Siemens component should not be treated as a direct replacement until the complete order number, hardware revision, terminal block or BaseUnit, signal configuration and system application have been confirmed. Compare the order code character by character with the installed item, then check the ET 200SP HA station records, module position, field wiring and applicable engineering documentation. For Ex components, hazardous-area certification, the Ex module-group arrangement and the permitted field-device connection must also be confirmed. The original label and project records remain the basis for technical comparison.

Please confirm Siemens 6ES7516-3FP03-0AB0, CPU variant CPU 1516F-3 PN/DP, fail-safe or technology requirement, included runtime licenses, firmware, TIA Portal version, Memory Card, network interfaces, program backup and required quantity before ordering.

You will receive an email confirming we have received your enquiry.

A dedicated account manager will review your model number, photos and application details before quotation.

You will receive a comprehensive quote tailored to your specific needs.